2010 Dodge Avenger Air Filter in Denver, CO

The 2010 Dodge Avenger engine air filter sits inside the intake air box in the engine bay, typically on the driver side near the fender.

Lift the hood and look for the rectangular plastic air box connected to the intake ducting ahead of the 2.4L inline-4 (engine code 4INAG2.4). In Denver’s dusty, high-altitude environment, this housing can collect debris along the intake snorkel. Our Havana Street shop inspects the box seal and ducting for leaks that can bypass filtration.

• Engine: 2.4L inline-4 (173 hp/166 lb-ft)
• Filter lives in a rectangular air box with metal or plastic clips
• We check box gasket, snorkel, and fasteners for proper seal

On the 2010 Dodge Avenger, the cabin air filter is typically located behind or beneath the glove box in the HVAC intake area.

Access usually involves opening the glove box and releasing its stops to reach the HVAC filter door. Road dust and Denver-area pollen can load this filter quickly, cutting airflow and fog-clearing performance. Our technicians replace the media and verify the blower door closes and seals correctly.

• Access panel near the glove box/HVAC plenum
• Replacement restores airflow and helps reduce odors
• We dispose of the old filter and confirm correct fitment

The engine air filter protects the 2.4L engines intake, while the cabin air filter cleans the air entering the passenger HVAC system.

Under-hood filtration ensures proper combustion and helps maintain power and fuel economy for your Avenger. The cabin filter targets dust, pollen, and road debris before it reaches you and your passengers. Both are serviceable components with different locations and media types.

• Engine filter: in air box; supports performance and efficiency
• Cabin filter: behind glove box; improves cabin air quality
• Both require periodic inspection and replacement

Common signs include reduced engine power, lower fuel economy, rough idle (engine filter), and weak HVAC airflow or musty odors (cabin filter).

In Denvers dry climate with seasonal pollen and roadside dust, the Avengers filters can load faster. If you notice sluggish acceleration or the fan working harder with less airflow, its time to inspect. Our service team can confirm restriction and advise OEM-spec replacement.

• Engine: hesitation, poorer MPG, darker filter media
• Cabin: reduced vents output, lingering smells
• Visual check: debris on pleats, collapsed media

Yes, the engine filter is often DIY-friendly, while the cabin filter may require trim access; the dealer adds OEM parts and intake/MAF checks.

Many Avenger owners can release the air box clips and swap the engine filter with basic tools. The cabin filter typically needs glove box removal and careful reassembly. Our Denver team installs genuine Mopar filters, inspects the intake housing and MAF area, and verifies seal integrity.

• DIY: engine filter; watch clip orientation and seal fit
• Dealer: cabin filter access, fitment, disposal included
• Added value: intake/MAF visual and housing gasket check

Yeswe install genuine Mopar engine and cabin air filters designed for Dodge vehicles.

OEM Mopar media meets the Avengers flow and filtration specs for the 2.4L inline-4 and HVAC system. Authentic parts help maintain performance and fitment, reducing the risk of leaks or noise. Ask our advisors about current service specials for added value.

• Genuine Mopar filters matched to Dodge specifications
• Proper fit helps preserve intake sealing and HVAC airflow
• Backed by our dealership parts warranty terms

Most 2010 Dodge Avenger air filter services are completed the same day during our hours: MonFri 7:00 AM6:00 PM and Sat 8:00 AM5:00 PM.

Engine and cabin filter access on the Avenger is straightforward, so turnaround is typically quick once the vehicle is in a bay. To minimize your wait, book a confirmed time slot online. If your inspection reveals additional intake or HVAC concerns, well review options before proceeding.

• Same-day completion in most cases
• Service hours support weekday and Saturday visits
• Reserve your spot: schedule service

Visit Larry H. Miller Chrysler Dodge Ram FIAT Denver at 2727 S. Havana St. for 2010 Dodge Avenger engine and cabin filter service.

Our factory-certified team serves Denver, Aurora, Parker, Centennial, and Littleton with Mopar parts and brand-specific diagnostics. You can schedule online or call (720) 734-3858 to speak with an advisor. Well confirm availability and any applicable service specials.

• Address: 2727 South Havana Street, Denver, CO
• Phone: (720) 734-3858
• Online booking: schedule service

Keep your 2010 Dodge Avenger breathing clean in Denver, Aurora, Parker, Centennial, and Littleton. Local conditionsdry spells, spring pollen, and dusty construction corridorscan load the engine and cabin filters faster than expected. Our certified technicians perform an intake housing check on the 2.4L inline-4, verify duct seals, and confirm proper cabin filter orientation behind the glove box. Using genuine Mopar media helps maintain smooth idle, solid throttle response, and healthy HVAC airflow. Ready when you are: book a visit online and well prepare the correct Dodge-specific parts for your Avenger. For directions or quick scheduling, use our online schedule service tool or call (720) 734-3858 for assistance.

The 2010 Dodge Avenger pairs a 2.4L inline-4 (engine code 4INAG2.4) with an under-hood rectangular engine air filter housed in a latched air box, and a cabin air filter located behind or below the glove box. Genuine Mopar filters are engineered to match the Avengers airflow and sealing requirements, reducing the risk of intake leaks and blower door gaps. If debris has collected in the snorkel or the cabin media is saturated, our team can document the condition and replace with OEM-spec parts. Bring your 2010 Dodge Avenger to Larry H. Miller Chrysler Dodge Ram FIAT Denver in Denver for OEM-spec filter service schedule service.

Our 2010 Dodge Avenger service includes a targeted inspection and replacement process for both filters. We visually inspect the engine air filter, replace it if restricted, and check the intake housing, ducting, and seals. For the cabin filter, we access the HVAC panel behind/below the glove box, install the new media in the correct airflow direction, and verify quiet, even fan operation. A mass airflow (MAF) area visual is performed where applicable, and all components are re-secured. Parts are genuine Mopar unless otherwise requested. Check current service specials and schedule your appointment or call (720) 734-3858 for availability.