2017 Chrysler 200 Check Engine Light

Certified technicians, only the experts.
Frequently Asked Questions

Frequently Asked Questions

What does it mean when the check engine light comes on in a 2017 Chrysler 200?

  • It indicates your vehicle’s onboard diagnostics system detected an issue—ranging from a loose gas cap to engine or emissions system faults. Our certified technicians at Larry H. Miller Chrysler Dodge Ram FIAT Denver in Denver, CO diagnose the exact cause quickly and accurately.
  • Choosing our dealership often costs less than independent shops when you factor in accurate diagnostics, factory parts, and long-term reliability. We emphasize immediate savings and lower lifetime repair costs through OEM parts and proper repair procedures.
  • Repairs covered under warranty must be performed at a certified dealership to preserve coverage; our factory-trained techs and genuine parts protect your warranty and vehicle longevity.
  • We offer flexible service financing so you can get service now and pay later. To book, schedule service online or check current service specials before you arrive.

How long does a check engine light service take?

  • Typical diagnostics and initial inspection take about 30–60 minutes; repair time depends on the issue. Basic fixes such as gas cap replacement or a simple sensor swap can often be completed the same day.
  • Complex repairs that require parts ordering or in-depth engine work will take longer, but our service advisors provide transparent timelines and keep you informed every step of the way.
  • Our Denver service center at Larry H. Miller Chrysler Dodge Ram FIAT Denver prioritizes quick turnaround using OEM parts, certified technicians, and streamlined check-in to minimize downtime.
  • We provide service financing options to make repairs affordable and encourage booking ahead—please schedule appointment to reserve a convenient time and see relevant service specials.

How much does a check engine light diagnostic cost for a 2017 Chrysler 200?

  • Diagnostic prices vary by issue, but our dealership provides competitive pricing and transparent estimates after inspection. Our approach often delivers lower total cost compared with independent shops because we avoid unnecessary repairs and use precise OEM diagnostics.
  • Immediate savings come from accurate diagnosis and targeted repairs; long-term savings come from OEM parts and certified workmanship that reduce repeat visits and protect vehicle value.
  • Warranty-covered diagnostics and repairs must be completed at a certified dealership to remain valid—our factory-trained techs ensure work meets warranty requirements.
  • We also offer service financing so you can start repairs now and pay over time. To get a diagnostic scheduled, schedule service and review current service specials.

What is the most common reason for check engine light on a 2017 Chrysler 200?

  • The most frequent causes include loose or faulty gas caps, oxygen sensors, catalytic converter issues, and ignition coil or spark plug failures. Each can trigger emissions-related diagnostic trouble codes.
  • Ignoring these signals can lead to reduced fuel economy, higher emissions, and escalating repair costs. At Larry H. Miller Chrysler Dodge Ram FIAT Denver we identify the root cause to avoid unnecessary parts replacement.
  • Repairs performed with OEM parts and certified technicians help restore fuel efficiency and prevent recurring faults—delivering both immediate and long-term savings compared to guesswork repairs.
  • To address the issue promptly, schedule service and check our latest service specials. Service financing is available to help manage cost.

What is the first thing to check when the check engine light comes on?

  • Start with the gas cap—ensure it’s tightened properly. A loose or damaged cap commonly triggers a check engine indicator and is an easy, low-cost fix.
  • If the light persists, bring your 2017 Chrysler 200 to Larry H. Miller Chrysler Dodge Ram FIAT Denver for a full diagnostic. Our certified technicians use OEM-grade scanners to read codes and recommend targeted repairs.
  • We focus on transparent pricing, and our diagnostic process often results in lower overall cost and longer vehicle life. Warranty repairs must be done at a certified dealership to retain coverage.
  • Book a visit now—schedule service online or review current service specials. Service financing is available if you need to pay over time.

Check Engine Light Flashing

When the check engine light is flashing on a 2017 Chrysler 200, it signals a potentially serious misfire or condition that can cause catalytic converter damage or poor engine performance. A flashing lamp typically means the engine is running so lean or misfiring that unburned fuel is entering the exhaust stream, which can overheat the catalytic converter and lead to costly repairs. At Larry H. Miller Chrysler Dodge Ram FIAT Denver in Denver, CO, our first priority is safety and preventing secondary damage. We perform an immediate diagnostic scan with OEM-grade tools to capture active codes and live data, then inspect ignition components, fuel delivery, and exhaust systems. Acting quickly not only reduces the risk of expensive downstream repairs but also preserves fuel economy and drivability. We offer service financing to get urgent repairs started right away and transparent estimates so you understand both immediate costs and long-term savings of doing the job correctly. Check our current service specials and schedule service to protect your vehicle and avoid escalation.

2017 Chrysler 200 Check Engine Light Reset

Resetting the check engine light on a 2017 Chrysler 200 can sometimes clear transient alerts, but it does not address root causes. A reset without repair may temporarily silence the light only for the fault to return, potentially masking a developing issue until it becomes more severe and costly. At Larry H. Miller Chrysler Dodge Ram FIAT Denver we advise a full diagnostic before any reset—our technicians read freeze-frame data and pending codes to identify underlying problems so repairs target the real cause. Using OEM parts and factory procedures ensures longevity and maintains warranty coverage; warranty repairs must be performed at certified dealerships to remain valid. Our transparent estimates highlight immediate and long-term savings: properly repairing the issue reduces repeat visits and preserves fuel economy and resale value. To make service affordable, we provide service financing options and regular service specials. When you’re ready, schedule appointment online to get a certified inspection, accurate diagnosis, and an honest plan to restore your 2017 Chrysler 200.

2017 Chrysler 200 Check Engine Light Codes

Common check engine light codes for a 2017 Chrysler 200 include P0440/P0455 (evaporative emissions leak), P0300–P0306 (random or cylinder misfires), P0135/P0138 (oxygen sensor faults), and P0420 (catalytic converter efficiency). Each code carries potential cost implications if left untreated: EVAP leaks can reduce fuel efficiency and fail emissions tests; misfires can damage catalytic converters and lead to engine damage; oxygen sensor faults reduce MPG and increase emissions; and P0420 can mean expensive converter replacement if neglected. At Larry H. Miller Chrysler Dodge Ram FIAT Denver in Denver, CO, we emphasize prompt diagnostics to prevent escalating repair bills. Our certified technicians use factory-grade scanners to identify the exact code and recommend targeted, OEM-backed repairs that typically save customers money over time versus repeated guesswork. We provide clear estimates, factory parts, and a warranty-backed repair process—repairs under warranty must be completed at a certified dealership to keep coverage intact. Check our service specials, consider service financing, and schedule service to address codes promptly and protect your 2017 Chrysler 200.

Shop by Vehicle

Service by Make

Used Vehicles

Quick Links