2019 Chrysler 300 Air Filter in Denver, CO

The engine air filter sits in the engine bay inside the sealed airbox, upstream of the intake ducting to the 3.6L V6.

Open the hood and look for a rectangular or square airbox with clips or screws; the filter lives beneath that lid, ahead of the throttle body. Keeping this filter clean helps the 3.6‑liter V6 maintain smooth airflow and fuel economy on Denver’s mixed city/highway routes. Our Denver team checks the housing and ducts for debris or loose seals during every filter service.

• Engine bay airbox ahead of the intake manifold
• Accessed by releasing perimeter clips or screws
• Seals inspected to prevent unfiltered air leaks

The cabin air filter is typically located behind the glove box within the HVAC inlet area.

On most Chrysler 300 models, you’ll lower the glove box, remove a small access panel, and slide the cabin filter out of its slot. This filter traps dust and pollen before air reaches the vents—useful for commuting around Denver and nearby suburbs. Our techs replace the element and check the door seal so the HVAC system maintains proper airflow and filtration.

• Access panel behind the glove box on the passenger side
• Slides out horizontally for inspection/replacement
• HVAC intake seals checked for proper closure

The engine air filter protects the 3.6L V6 intake from dirt, while the cabin filter cleans HVAC air for passengers.

Both filters look similar but serve different systems. The engine element keeps abrasive particles out of the intake tract to support power and efficiency; the cabin element captures dust, pollen, and road debris before it enters the interior. In Denver traffic and changing seasons, maintaining both filters helps your Chrysler 300 run well and keeps the cabin comfortable.

• Engine filter = combustion air; cabin filter = passenger air
• Engine filter lives in the under-hood airbox
• Cabin filter mounts in the HVAC intake behind the glove box

Common signs include reduced power, lower fuel economy, and rough idle for the engine filter; weak airflow and musty odors for the cabin filter.

If the 3.6L V6 cant breathe, you may notice sluggish acceleration or higher fuel use. A dirty cabin filter often shows up as louder blower noise with less air at the vents or persistent odors. Our Denver service team inspects both filters and surrounding housings, then recommends OEM-spec replacements only when needed.

• Engine: hesitation, poor MPG, dark or debris-laden filter media
• Cabin: low vent airflow, dusty vents, odors
• Visual check of seals and ducts prevents repeat issues

Yes—engine filters are often DIY-friendly; cabin filters may require glove box removal, and dealer service adds intake/HVAC inspections and Mopar-spec parts.

Many owners can swap the engine filter with basic tools, but the cabin filters access panel and clips can be tricky. Dealer installation at Larry H. Miller Chrysler Dodge Ram FIAT Denver includes housing checks, seal fitment, and a look at the intake ducting or blower area. That way your 2019 Chrysler 300 leaves with verified airflow.

• DIY: engine filter via airbox clips or screws
• Cabin filter: glove box lowering and panel removal
• Dealer adds duct, seal, and MAF visual checks

Yes—our Denver service department installs Mopar OEM filters that meet Chrysler engineering specifications.

OEM components are designed for the Chrysler 300s 3.6L V6 intake and HVAC system, helping preserve performance and noise levels. Genuine parts also ensure proper fit in the airbox and behind the glove box. When you service with us in Denver, your 2019 Chrysler 300 gets factory-spec filtration and certified installation.

• Mopar OEM filters for engine and cabin
• Built to Chrysler 300 fit and flow specs
• Installed by Mopar-certified technicians

Book online at /service/schedule-service-denver.htm or call (720) 734-3858.

Our certified service department at 2727 South Havana Street offers convenient online scheduling for engine and cabin filter maintenance. Choose a time, review service specials, and well prepare Mopar filters for your visit. If you have questions about your 2019 Chrysler 300, our advisors can help you pick the right appointment slot.

• Online scheduling with preferred times
• Phone support at (720) 734-3858
• Service specials posted and updated online

Visit Larry H. Miller Chrysler Dodge Ram FIAT Denver at 2727 South Havana Street for OEM-spec air filter service.

Our factory-certified facility serves Denver, Aurora, Parker, Centennial, and Littleton with Mopar engine and cabin filters. We inspect housings and seals, then replace only what your Chrysler 300 needs. Use our schedule service tool to reserve a time, or call (720) 734-3858 for assistance.

• Address: 2727 South Havana Street, Denver, CO
• Mopar-certified technicians and OEM parts
• Easy online scheduling and local support

Yes—request a cabin filter inspection when you book, and well verify condition during your visit.

Our advisors can add a quick cabin filter check to your service write-up so you leave with clear HVAC airflow and clean vents. If replacement is recommended, we stock Mopar filters sized for the Chrysler 300s glove box access panel. You can also review current service specials before authorizing work.

• Inspection added by request at check-in
• Mopar-fit element installed if replacement is approved
• Results explained before any work proceeds

Our process focuses on clean airflow and proper fit for the Chrysler 300 platform. For the engine, we open the airbox, remove debris, inspect seals and ducts, and install a Mopar-spec element that matches the 3.6L V6 intake requirements. For the cabin, we lower the glove box as needed, access the HVAC filter door, remove the used media, vacuum any loose debris at the intake, and fit a Mopar cabin filter to restore ventilation and filtration. We finish by verifying clips, fasteners, and seals, then test HVAC and engine idle for stable airflow readings. Ready to proceed? Schedule service or call (720) 734-3858. Dont forget to check our current service specials before you arrive.

We support drivers across Denver, Aurora, Parker, Centennial, and Littleton with factory-certified filter care that suits local driving patterns. Stop-and-go commuting and seasonal dust can load filters faster, so we inspect both the engine and cabin elements whenever you request air service. Our team uses Mopar components and checks related hardware for sealing and fit, helping your 2019 Chrysler 300 maintain smooth intake airflow and clean cabin ventilation. Use our online system to choose a time that works and review service specials. For directions or quick booking help, schedule an appointment online or call (720) 734-3858.

The 2019 Chrysler 300 with the 3.6L V6 uses a panel-style engine air filter in a sealed under-hood airbox and a cabin air filter mounted behind the glove box. Mopar OEM filters are engineered to meet Chrysler flow and filtration targets for both the intake and HVAC systems. Always follow the maintenance schedule in your owners manual and have filters inspected sooner if you notice reduced power, poor fuel economy, weak vent airflow, or odors. A clean, well-fitted filter preserves performance and comfort. Bring your 2019 Chrysler 300 to Larry H. Miller Chrysler Dodge Ram FIAT Denver in Denver for OEM-spec filter service — schedule service.